Based in Globe, AZ · working about 75 miles around
Well Pumps · Tanks · Solar · Windmills (928) 961-6641
JACOB'S WELLand Pump Services
Stuck Well Pump Retrieval in Globe, AZ
Our Services

Stuck Well Pump Retrieval in Globe, AZ

Stuck Pump Retrieval · Globe, AZ

Getting a stuck or dropped pump back up the well

Stuck well pump retrieval is for a pump that will not come up out of the well. Sometimes the pump hangs up partway, and sometimes old pipe breaks and drops it down the hole. Bringing a pump, pipe or rod back up is called pump fishing, and it is regular work for us. We are based in Globe, and we fish pumps across Gila County as part of our well pump repair service.

If your pump is stuck in the well, stop pulling and shut the power off at the breaker. Leave the wire and the safety rope as they are, and do not send anything else down the hole. Write down what came up and what stayed down, then call or text (928) 961-6641. A home or a herd with no water moves to the front of the schedule.

What We Handle

  • Pump fishing for pumps and drop pipe that broke off or dropped down the well
  • Corroded galvanized and black poly drop pipe brought back up the hole
  • Fishing tools chosen for what is down there: the pump, the pipe or the rod
  • Downhole camera run when we need to see what is in the hole
  • Stuck pumps pulled with our own truck-mounted pump hoist rig
  • Dropped sucker rod and pipe fished out of windmill wells
  • Worn drop pipe, wire, check valves and fittings replaced while the pump is out
  • Pump reset at the right depth, the system tested and the wellhead sealed back up

Stuck Pump Retrieval Quote

Tell us what your well is doing. We will call or text you back.

Why is my pump stuck in the well?

Pumps drop when the pipe or a coupling holding them fails. Old galvanized drop pipe can rust through at the threads. We have fished out a pump that broke off more than 100 feet down on corroded galvanized pipe. Black poly pipe can kink or part too, and we have fished it out of wells more than once.

Other pumps hang up on the way out. Sand or scale in a well that has filled in can wedge a pump in place. A pump set too deep can sit down in that sand. Wire and safety rope can wrap around the pipe and bind, and damaged casing can catch the pump.

Those are common causes, and we find out which one it is at the well. If sand has filled the bottom of the well, well cleaning and rehabilitation can follow once the pump is out.

How pump fishing works on wells around Globe

First we learn what is down the hole. Your notes on what came up help, and the downhole camera goes in when we need to see more. Then we pick the fishing tool for what is down there: the pump, the pipe or the rod. Our truck-mounted pump hoist rig makes the pull.

Depth changes the job. Along Tonto Creek we work wells under 100 feet deep. In the high country we work wells more than 700 feet deep. The deeper the pump sits, the more pipe and wire come up and the more weight hangs on the rig.

Once the pump is up, worn drop pipe, wire, check valves and fittings get replaced. If the old pump is past repair, well pump replacement comes next. Either way, the pump goes back in at the right depth. Windmill wells drop sucker rod and pipe too, and fishing them out is part of our windmill repair work.

When a well pump cannot be pulled or fished out

Some wells cannot give the pump back. A pump can be wedged too tight to move, or the casing can be too damaged to work through. When that happens, we explain what we found and what your choices are.

The next step may be drilling work. Deepening a well or drilling a new one takes authority from the Arizona Department of Water Resources (ADWR). A licensed well drilling contractor must do the work.

Arizona law says a well owner must cap an open well. Sealing a well for good is called abandonment, and it follows ADWR's rules too.

Fishing tool hanging from the hoist chain over a wellhead Crew member guiding drop pipe on the hoist line at a wellhead

Ready to get started?

A quote before work begins, across Globe, Miami, Payson, Tonto Basin, San Carlos, Kearny, Mammoth and about 75 miles around Globe.

(928) 961-6641
How We Work

How a Job With Jacob's Well and Pump Services Runs

From the first call to water back at the tap or the tank, here is how it goes.

1

Tell us what the well is doing

Call or text (928) 961-6641, or send the form. No water, low pressure, short cycling or a tripped breaker all point somewhere.

2

We ask about the well

Depth, age, the pump that is in it, and the ADWR registration number if you have one. Those numbers start with 55, and old paperwork tells us what is down the hole.

3

On site, the electrical side first

The pressure switch, control box, wiring and motor readings get tested at the wellhead before anything is pulled.

4

The scope of work, then the quote

You hear what the repair involves and what it will cost before the work starts. Nothing comes out of the well until you say go.

5

The repair, then a tested system

The pump is pulled and repaired or replaced, and the pipe and wire go back right. Then the system is run and checked, and the wellhead is sealed back up.

FAQ

Stuck Pump Retrieval Questions, Answered

Common questions about stuck pump retrieval across Globe, Miami, Payson, Tonto Basin, San Carlos, Kearny, Mammoth and about 75 miles around Globe. If yours is not here, call and ask.

Call (928) 961-6641

Should I keep trying to pull the pump myself?
No, stop once the pump hangs up. Pulling harder can part the pipe or tear the wire and drop the pump. Shut the power off at the breaker and leave the wire and the safety rope as they are. Cut wire and rope can fall down the hole on top of the pump.
Can every stuck pump be recovered?
No, some wells cannot give the pump back. It depends on the well, what is down there and how tightly it is stuck. We tell you what we find as the work goes. When a pump stays down, the next step may be drilling work by a licensed well drilling contractor.
How much does it cost to get a stuck pump out of a well?
It depends on the well and what is down it, and you get a quote before work begins. Depth matters, because a deeper pump means more pipe and wire to bring up. What dropped, how tightly it is stuck and how close the rig can get all count. We explain the scope of work first.
What happens to the well after the pump comes out?
We look the well over, then set it back up to pump. When steel casing has corroded through, a liner is sometimes the answer. We tell you whether your well is a candidate. Then the pump goes back in, the system is tested and the wellhead is sealed back up.
Can you fish dropped sucker rod out of a windmill well?
Yes, we fish dropped sucker rod and drop pipe out of windmill wells. Sucker rod can part at a coupling and drop down inside the drop pipe. Once it is out, the rod assembly can be rebuilt with a new cylinder, leathers and check valves.
If the pump cannot come out, can you drill a new well?
We are not taking well drilling jobs at this time. Our work is everything after the well is drilled: pumps, pressure tanks, storage tanks, solar pump systems, windmills and cleaning out existing wells. A new or deeper well takes ADWR authority and a licensed well drilling contractor.
More From Jacob's Well and Pump Services

Work That Pairs With Stuck Pump Retrieval

New galvanized drop pipe stacked beside the service truck before going down a well

Pump Replacement

We replace worn out well pumps with new submersible pumps sized to the well's depth and yield. New drop pipe, wire, a check valve and a well seal go down with the pump.

Learn More
Well brush coming back up out of the casing after brushing a water well

Well Cleaning

We clean out existing wells that have filled in with sand, rust and scale. The pump comes out, the hole gets bailed and the casing brushed, then we test pump the well.

Learn More
Water-pumping windmill on its tower with the service truck parked alongside

Windmill Repair

We service and repair water pumping windmills on ranches around Globe. Gearbox oil, new leathers, sucker rod, drop pipe and tower work are all part of it.

Learn More
Why Choose Jacob's Well and Pump Services

Built for Wells in Gila County and the Country Around It

The electrical side gets tested first

Pressure switch, control box, wiring and motor readings come before a pump is pulled. A bad switch is a much smaller repair than a pump.

Our own pump hoist rig and fishing tools

The rig pulls and sets pumps and pipe on shallow wells and deep ones. The fishing tools bring up pumps, pipe and rod that have broken off down the hole.

House, ranch, solar and windmill wells

One company handles the house pump, the stock well, the storage tank, the solar setup and the windmill. The whole water system gets looked at together.

Based in Globe, working about 75 miles out

We cover Gila County and the country around it, on ranch roads as well as in town. A home or a herd with no water moves to the front of the schedule.

Google Reviews

Rated 5.0 on Google by Well Owners Around Globe

Real reviews from real well and pump jobs, 13 reviews on Google.

Read All Reviews

My well is more than 20 years old and began needing repairs. Upon calling Jacob's Well and Pump Service, I was pleased with their quick response and concern to restore my water supply. Prior to the repairs, the scope of work was explained to me, the repairs were made, and the crew always worked in a professional and timely manner. I definitely recommend Jacob's Well and Pump Service.

Dixie Mundy3 years ago · Google review

Great people, very knowledgeable and respectful. Have the equipment to get the job done.

Terri Andress2 years ago · Google review

Jacob's does quality work at a fair price, and always gives the effort required to get the job done right and as quickly as possible. I have worked with them on a number of jobs and they work Iike they are trying to give a good first impression on every project.

Get a Quote

Get In Touch With Jacob's Well and Pump Services

Tell us what the well is doing and we pick it up from there. Call or text (928) 961-6641, or fill in the form below and we will call you.

  • (928) 961-6641
  • Globe, AZ · serving Globe, Miami, Payson, Tonto Basin, San Carlos, Kearny, Mammoth and about 75 miles around Globe
  • Well pumps, pressure tanks, storage tanks, solar well pumps, windmills and well cleaning

Get a Quote

Tell us what your well is doing. We will call or text you back.

Call (928) 961-6641